How do I use the Movie Digest function to shoot and to play back movies made with it? (PowerShot ELPH 300 HS / 100 HS, IXUS 220 HS / 115 HS).

Article ID: ART111009 | Date published: 05/11/2015 | Date last updated: 08/17/2015
 

Solution

You can make a short movie of a day just by taking still images.

Each time you take a picture, the scene just before taking your shot (about two to four seconds) will be automatically recorded as a movie. All the movies recorded on the same day will be saved as a single file.

Important:
  • If the camera's <Mode Switch> is set to [AUTO] () mode, [Movie Digest] () cannot be selected.
  • Since you are also shooting movies when you shoot still images, the battery will be depleted more quickly than in [AUTO] () mode.
  • The image quality will be fixed at () for movies shot in [Movie Digest] () mode.
  • In the following cases, movies will be saved as separate files even if they were shot on the same day with [Movie Digest] () mode.

- If the clip file size reaches 4 GB or the recording time reaches approximately 1 hour

- If the movie is protected

- If the Time Zone setting is changed

- When a new folder is created

Shooting

1. Set the <Mode Switch> to [Shooting] () and then press the <Power> button.

2. Press the <FUNC./SET> () button.

3. The following screen appears.

Operate the <directional button> up or down to select [Rec. Mode] (If no changes have been made so far, [Program] () will be displayed).

After the settings are completed, press the <FUNC./SET> () button.

4. Operate the <directional button> up or down to select [Movie Digest] ().

After the settings are completed, press the <FUNC./SET> () button.


5. Shoot.

Note:

  • If you operate the camera while shooting a movie, the sounds made will be recorded in the movie.
  • The camera will not play sounds, such as when pressing the <Shutter Button> halfway, using the controls or the self-timer.
  • If you take a picture just after turning on the camera, choosing [Movie Digest] () mode or otherwise operating the camera, a movie may not be recorded.


Playing Back

You can select movies made in [Movie Digest] () mode by date for viewing.

1. Press the <Playback> () button on the camera.

2. Press the <FUNC./SET> () button.

3. The following screen appears.

Operate the <directional button> up or down to select [Movie Digest Playback] ().

After the settings are completed, press the <FUNC./SET> () button.

4. The following screen appears.

Operate the <directional button> up or down to select the date of the movie that you wish to play back.

5. Press the <FUNC./SET> button () to play back the movie.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments