Raise the [ISO speed] to use a fast shutter speed when you wish to reduce the effects of camera shake or avoid blurry subjects, or to turn the flash off when shooting in a dark area.
Also, with [ISO AUTO] (
) selected, you can set the maximum ISO speed, or select the rate of change.
Changing the ISO Speed
important:
1. Press the <Power> button on the camera.
2. Press the <FUNC./SET> (
) button.
3. The following screen appears on the LCD monitor.
Operate the <Directional buttons> left or right to select an [ISO Speed]* of your choice.
After the selection is made, press the <FUNC./SET> () button.
* Select the appropriate [ISO Speed] for the shooting environment.
If the camera shake warning icon (
) appears when you press the <Shutter Button> halfway, it is recommended to gradually raise the ISO speed in increments such as [ISO 80], [ISO 100], etc., and then set the [ISO Speed] when the camera shake warning icon () disappears.
| Guidelines for changing the ISO speed |
|---|
| Automatically adjusts the ISO speed to the Shooting mode and shooting conditions. |
     | Fine weather conditions, outdoor shooting. |
      | Cloudy, twilight |
         | Nightscapes, dark interiors |
4. If the following icon is shown, the setting is complete (if setting [ISO Speed] to 400).
note:
- Lowering the [ISO speed] results in sharper images, but there may be an increased chance of image blurring in certain shooting conditions.
- Raising the [ISO speed] results in a faster shutter speed, reducing image blurring and letting the flash reach greater distances to the subject. The images, however, will appear coarse.
Changing the maximum ISO speed and the rate of change in the ISO Auto
important:
- Follow the steps below to set the maximum ISO speed with [ISO AUTO] () selected.
1. Press the <MENU> (
) button.
2. The following screen appears on the LCD monitor.
Operate the <Directional buttons> left or right to select the [Shooting] (
) menu.
the <Directional buttons> up or down to select the [ISO Auto Settings].
Press the <FUNC./SET> () button.
3. The following screen appears on the LCD monitor.
Select [Max ISO Speed], operate the <Directional buttons> left or right to select one of the speed settings.
note:
You can set the [Max ISO Speed] to the speed settings between [ISO400] () and [ISO1600] ().
- Follow the steps below to set the rate of change with [ISO AUTO] () selected.
Select [Rate of Change] under [ISO Auto Settings].
Operate the <Directional buttons> left or right to select one of the items.
note:
You can select one of the three types, [Fast], [Slow], and [Standard] for the [Rate of Change].
After you set the [Rate of Change], press the <MENU> () button.
) .
), [Manual] (
), [Aperture Priority] (
), [Shutter Speed Priority] (
), [Program] (
)