Registering the Quantity that You Frequently Copy (Up to Twenty-nine Copies)
You can call a registered quantity using one-touch button to copy by registering a copy quantity.
You can register the copy quantity up to twenty-nine copies.
note:
Before registering the copy quantity
Register the quantity after pressing [ ] to reset the settings.
Press and hold [ ] more than 5 seconds.
After this, "F" is on, and [] (Copy setting key) blinks.
Press [ ] or [] to display the quantity that you want to register.
The quantity that you want to register:
1 to 9
10 to 19
20 to 29
Display:
1 to 9
+0 to +9
+/-0 to +/-9
Press [ ] (Copy setting key) to confirm the setting.
m² The specified quantity is displayed after "F."
Example) When the quantity is set to twenty-five copies
note:
Saving the registered quantity
The registered quantity is saved even if you press [ ] or turn the power OFF.
To display "F"
When [ ] is pressed, "F" is displayed.
Adjusting the Density
Operating results
Operating procedures
1
Place the document.
2
Press [ ] or [] to specify the copy quantity.
Specify the copy quantity first.
You can set the copy quantity to "F" or "1" to "9."
3
Press [ ] (Copy setting key) to blink the [] indicator.
4
Adjust the density. * When setting the value to [A], the density is automatically set according to the documents.
* [A] is the only suitable mode for text documents.
5
"Press [ ] to start copying.
< Canceling copy jobs >
Press []."
Enlarging/Reducing Copy
Operating results
Operating procedures
1
Place the document.
2
Press [ ] or [] to specify the copy quantity.
Specify the copy quantity first.
You can set the copy quantity to "F" or "1" to "9."
3
Press [ ] (Copy setting key) to blink the [] indicator.
4
Change the ratio.
5
"Press [ ] to start copying.
< Canceling copy jobs >
Press []."
note:
* You cannot perform the enlarged or reduced copy when combined with the following functions.
ID Card Copy
2 on 1 Copy
Copying Two Documents onto One Sheet (2 on 1 Copy)
You can copy the two documents onto one sheet by reducing the size.
note:
Before copying
If the [ ] indicator is on or other than [1] is displayed, the previous copy settings are remained. In this case, Press [ ] and reset the settings.
* If a key is not pressed for 2 minutes, the copy settings will be automatically reset.
note:
You can copy with the combined functions.
Custom copy quantity
Copy density
Copy type setting
Sharpness setting
Paper size requirements
A size larger than A4 or Letter.
Operating results
Operating procedures
1
Place the document.
2
Press [ ] or [] to specify the copy quantity.
Specify the copy quantity first.
You can set the copy quantity to "F" or "1" to "9."
3
Press [ ] (Copy setting key) to blink the [] indicator.
4
Press [ ] or [] to display "P".
5
Press [ ]] to scan the first document.
After scanning, "P" blinks.
6
Place the second document.
7
Press [ ] to scan the second document.
After scanning, printing starts.
Selecting Copy Type (Speed Priority/Resolution Priorlty)
Select whether to set priority on copy speed or resolution to copy.
Operating results
Operating procedures
1
Place the document.
2
Press [ ] or [] to specify the copy quantity.
Specify the copy quantity first.
You can set the copy quantity to "F" or "1" to "9."
3
Press [ ] (Menu setting key), and then start the menu operation.
When the menu is operating, the menu indicator blinks.
4
Press [ ] or [] until "E" is displayed.
5
Press [ ], and set the menu to be able to change the settings.
6
Press [ ] or [] to change the setting values.
The display and the paper types are matched as follows.
Display
Copy type
1
Speed priority
2
Resolution priority
7
Press [ ] to confirm the setting.
8
Press [ ] (Menu setting key) to exit the menu operation.
The menu indicator turns off.
Emphasizing the Outline of an Image (Sharpness)
You can emphasize the outline of the image in the documents or decrease the contrast.
Operating results
Operating procedures
1
Place the document.
2
Press [ ] or [] to specify the copy quantity.
Specify the copy quantity first.
You can set the copy quantity to "F" or "1" to "9."
3
Press [ ] (Menu setting key), and then start the menu operation.
When the menu is operating, the menu indicator blinks.
4
Press [ ] or [] until "S" is displayed.
5
Press [ ] to set the menu to be able to change the settings.
6
Press [ ] or [] to change the setting values.
< Pressing [] to decrease the values >
It is appropriate when you want to copy documents clearly such as photos.
< Pressing [] to increase the values >
It is appropriate when you want to copy text and lines clearly.
7
Press [ ] to confirm the setting.
8
Press [ ] (Menu setting key) to exit the menu operation.
The menu indicator turns off.
] to reset the settings.
