Setup the MG3120 for use over a Windows wireless LAN using WPS (Wi-Fi Protected Setup)

Article ID: ART111251 | Date published: 05/11/2015 | Date last updated: 01/07/2016


How to perform the wireless LAN setup using WPS connection (Windows)


Wi-Fi Protected Setup (WPS) Installation

Read this section only when setting up a wireless connection by using the WPS (Wi-Fi Protected Setup). For details on WPS, refer to your access point's manual.

- Before performing the wireless setup

Wireless Setup Using WPS (Wi-Fi Protected Setup)

Do not connect the USB cable yet.

  • Quit all applications before installation.
  • Log on using an administrator account.
  • Internet connection may be required during the installation. Connection fees apply.


If you are using a Windows 10 PC, click here for instructions on executing a WPS Push Button setup.  After connecting the printer to your wireless router, download and install the MP Driver from our website.

Screens are based on Windows 7 operating system Home Premium. Actual screens may differ depending on the OS version.

1. Press the ON button to turn off the machine.

Operating noise stops after about 30 seconds.

2. Insert the CD-ROM into the computer.


If the USB cable is already connected, unplug it. If a message appears on the computer, click Cancel.


3. Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box.

If the User Account Control dialog box reappears in following steps, click Yes or Continue.


If the CD-ROM does not autorun:

Double-click (My) Computer > CDROM icon > MSETUP4.EXE.


4. Click Next.

5. Click Wireless Connection.

Follow the instruction and go to step 6.


If an error message is displayed, see "Troubleshooting" at the right.


6. Click WPS.

Follow the instruction until the screen below is displayed.

7. Network connection setting is complete.

Click "Next", then wait until the next screen appears.

Install the Software (Information)

Let's perform the software installation.

1. Click Next.

  • Easy-WebPrint EX

Easy-WebPrint EX is Web print software that is installed on the computer when installing the supplied software. Internet Explorer 7 or later (Windows) is required to use this software. An Internet connection is required for installation.


Follow any on-screen instructions to proceed with the software installation.

2. When the Setup Completion dialog box appears, click Complete.

3. Click Next.

- Important Information for the Installation

  • If the Extended Survey Program screen appears

If you can agree to Extended Survey Program, click Agree.

If you click Do not agree, the Extended Survey Program will not be installed.

(This has no effect on the machine's functionality.)

  • When the [Test Print] window is displayed

Test printing will be performed to check the printer's operation.

Load plain paper into the printer and click [Execute].

After test print, click [Next].

To skip test printing, click [Next] instead of [Execute].

4. Click Exit to complete the installation.

Remove the Setup CD-ROM and keep it in a safe place.

5. Solution Menu EX starts.

The end of the procedure of the wireless LAN setup.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments