Wi-Fi Protected Setup (WPS) Installation
Read this section only when setting up a wireless connection by using the WPS (Wi-Fi Protected Setup). For details on WPS, refer to your access point's manual.
- Before performing the wireless setup
Wireless Setup Using WPS (Wi-Fi Protected Setup)
attention:
Do not connect the USB cable yet.
important:
- Quit all applications before installation.
- Internet connection may be required during the installation. Connection fees apply.
Screens are based on Mac OS X v.10.6.x. Actual screens may differ depending on the OS version.
1. Press the ON button to turn off the machine.
Operating noise stops after about 30 seconds.
2. Insert the CD-ROM into the computer.
important:
If the USB cable is already connected, unplug it. If a message appears on the computer, click Cancel.
3.
Double-click the Setup icon of the CD-ROM folder to proceed to the following screen. Enter your administrator name and password, then click OK.
If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop.
If you do not know your administrator name or password, click the help button, then follow the on-screen instructions.
reference:
If the CD-ROM does not autorun:
Double-click the CD-ROM icon on the desktop.
4. Click Next.
5. Click Wireless Connection.
Follow the instruction and go to step 6.
reference:
If an error message is displayed, see "Troubleshooting" at the right.
6. Click WPS.
Follow the instruction until the screen below is displayed.
7. Network connection setting is complete.
Click "Next", then wait until the next screen appears.
Install the Software (Information)
Let's perform the software installation.
1. Click Next.
reference:
Easy-WebPrint EX is Web print software that is installed on the computer when installing the supplied software. Safari 4 or later (Mac OS X v.10.5 or later) is required to use this software. An Internet connection is required for installation.
Follow any on-screen instructions to proceed with the software installation.
2. Click Add Printer.
- Proceed to the section that relates to your operating system for further installation instructions.
Mac OS X v.10.6.x -> 3-A
Mac OS X v.10.5.x -> 3-A
Mac OS X v.10.4.11 -> 3-B
reference:
- The alphanumeric characters after Canon xxx series is the machine's Bonjour service name or MAC address.
- If the machine is not detected, make sure of the following.
- The machine is turned on.
- The firewall function of any security software is turned off.
- The computer is connected to the access point.
reference:
XXX: xxx refers to the model name you are using.
3-A.
Mac OS X v.10.6.x/v.10.5.x
(1)
Select Canon xxx series canonijnetwork and click Add.
3-B.
Mac OS X v.10.4.11
(1)
When the Printer List window appears, click Add.
reference:
When the You have no printers available. screen appears, click Add.
(2)
Click More Printers in the Printer Browser window.
(3)
Select Canon IJ Network in the pop-up menu, select Canon xxx series in the list of printers, then click Add.
(4)
Make sure that Canon xxx series is added to the list of printers.
4. Click Next.
5. Click Next.
- Important Information for the Installation
- If the Extended Survey Program screen appears
If you can agree to Extended Survey Program, click Agree.
If you click Do not agree, the Extended Survey Program will not be installed.
(This has no effect on the machine's functionality.)
- When the [Test Print] window is displayed
Test printing will be performed to check the printer's operation.
Load plain paper into the printer and click [Execute].
After test printin, click [Next].
To skip test printing, click [Next] instead of [Execute].
6. Click Exit to complete the installation.
Remove the Setup CD-ROM and keep it in a safe place.
7. Solution Menu EX starts.
The end of the procedure of the wireless LAN setup.
