Setting Paper Size and Type
For the Paper Cassette
1. Press [ ] (Select Paper/Settings).
2. Select <Paper Settings> with [ ] or [ ], and then press [OK].
3. Select <Drawer 1> or <Drawer 2> with [ ] or [ ], and then press [OK].
<Drawer 2> is displayed only when the optional paper cassette (Cassette 2) is installed in MF8380Cdw.
4. Select a paper size with [ ] or [ ], and then press [OK].
* When registering the custom paper, see "."
* The registered custom paper is listed at the top. Select it with [ ].
5. Select a paper type with [ ] or [ ], and then press [OK].
6. Press [ ] (Reset) to return to standby mode.
For the Multi-Purpose Tray/Manual Feed Slot
If you want to always load the same paper in the multi-purpose tray (manual feed slot), register the default paper using the following procedure.
note:
If the default paper is registered, the setting screen is not displayed when paper is loaded.
1. Press [ ] (Select Paper/Settings).
2. Select <Paper Settings> with [ ] or [ ], and then press [OK].
3. Select <Multi-Purpose Tray> with [ ] or [ ], and then press [OK].
4. Select <On> with [ ] or [ ], and then press [OK].
5. Select <Paper Settings> with [ ] or [ ], and then press [OK].
6. Select <Multi-Purpose Tray> with [ ] or [ ], and then press [OK].
7. Select <Set Details> with [ ] or [ ], and then press [OK].
8. Select a paper size with [ ] or [ ], and then press [OK].
* When registering the custom paper, see "."
* The registered custom paper is listed at the top. Select it with [ ].
- If you select <Custom Size>
Specifies the size of <X> direction and <Y> direction of the custom paper.
(1) Select the direction with [ ] or [ ], and then press [OK].
(2) Specify the size with [ ] or [ ], and then press [OK].
(3) Select <Apply> with [ ] or [ ], and then press [OK].
9. Select the paper type with [ ] or [ ], and then press [OK].
10. Press [ ] (Reset) to return to standby mode.