Viewing images on a standard TV (using a Stereo AV Cable)
By using the Stereo AV Cable [AVC-DC400ST] (sold separately), you can connect the camera to a TV to view the captured images.
important:
- Images will not display correctly if the camera's video output setting (NTSC / PAL) does not match the TV system. Press the <
> button, and then select the [Set up] (
) tab > [Video System] to switch to the correct video output setting.
1. Turn off the camera and the TV.
2. Connect the Stereo AV Cable to the camera’s [A/V OUT / DIGITAL] terminal.
3. Connect the Stereo AV Cable to the TV’s video-in terminal and audio-in terminal.
Plug the yellow terminal into the VIDEO IN jack (Yellow) on the TV.
Plug the white terminal into the AUDIO IN jack (Left) (White) on the TV.
Plug the red terminal into the AUDIO IN jack (Right) (Red) on the TV.
4. Turn on the TV and switch it to video mode.
5. Press the <Playback> (
) button to turn on the camera.
The image will appear on the TV (nothing will appear on the screen of the camera).
When you want to stop playing back images, turn off the camera and the TV first before removing the Stereo AV Cable.
Viewing images on an HD (High-Definition) TV (using an HDMI Cable)
By using the HDMI Cable [HTC-100] (sold separately), you can connect the camera to a high-definition TV and enhance your viewing experience.
When you connect the camera to an HDMI CEC-compatible TV, you can use the TV's remote control to operate the camera and play back images or view slideshows.
important:
- Operation sounds will not play when connected to a high-definition TV.
- Some TVs may not be able to control the camera properly even though they are HDMI CEC compatible.
note:
Using the HDMI CEC function
- You may need to make settings on some TVs. For details, refer to the user guide supplied with the TV.
- When using the HDMI CEC function, follow the steps below to make settings before connecting the camera to a TV.
1. Press the <> button to display the window below.
2. Operate the <Directional buttons> to select the 
[Set up] () tab, and set 
[Ctrl via HDMI] to [Enable].
3. Press the <> button.
1. Turn off the camera and the TV.
2. Connect the HDMI Cable to the camera's [HDMI Terminal].
3. Connect the HDMI Cable to the high-definition TV's [HDMI Terminal].
4. Turn on the TV and switch it to HDMI mode.
5. Press the <Playback> () button to turn on the camera.
The image will appear on the TV (nothing will appear on the screen of the camera).
note:
While the HDMI CEC function is in use, operate the camera with the TV’s remote control.
- Press the remote control's <Directional buttons> right and left to choose an image.
- Press the OK/Select button to display the camera control panel. Press the <Directional buttons> right and left to choose an item, then press the OK/Select button again.
<Summary of the Camera Control Panel Displayed on the TV>
[Return] : Closes the menu.
[Group playback] : Displays groups of High-speed Burst images (only appears when grouped images are chosen).
[Play Movie] : Plays a movie (only appears when a movie is chosen).
[Slideshow] : Plays back images automatically. During playback, you can press the remote control’s <Directional buttons> right and left to switch images.
[Index Playback] : Displays images in an index.
[Change Display] : Changes the screen display.
- If you operate the controls on the camera, you will not be able to control the camera with the TV's remote control until you return to single image playback.
