 |
Power control and status check |
Click Power & Status on the main menu. The control page will be displayed.
By clicking ON or Standby button on the page, the power of the projector can be controlled.
Item Description
PJ status
Power .......................... Displays the status of the lamp. (ON, OFF, On starting up, On cooling down, Service in need)
Status .......................... Displays the status of the projector's power. (Refer to next page.)
Power control............... Controls the projector power by clicking the "ON" or "Standby" button.
The projector cannot be turned on while the projector is on cooling down.
The web browser checks and updates the projector's condition every 30 seconds automatically.
About projector condition
Status Description
Normal.............................................. Projector is operating normally.
Power management in operation......... Power management is operating
Lamp failure.......................................Lamp failure is occurring
Abnormal Temperature.......................The temperature of the projector became too high
Standby after Abnormal Temp.......... .Projector detects abnormal temp. and sets into standby mode.
Power failure .....................................Power failure has occurred inside the projector. Projector is turned off. Unplug the AC cord and ask servicing to a qualified service personnel.
When a security (PIN code lock) has been set on the projector, you also cannot control it through the network. To control the projector through the network, unlock the security on the projector using with the projector's menu control.
Caution about turning on/off the projector via the networks
When turning on/off the projector via the networks, preset the projector as follows:
1. Select "Setting" from the Projector menu.
2. Select "Standby mode" from the Setting menu and set it as "Network".
If you set this function as "Network", the network part of the projector is constantly provided with power even if the projector is turned off. If you set this as Eco, then the network part will be turned off when you turn off the projector. Consequently, you cannot turn on/off the projector via the networks
