Paper Jams - Pro9500 Mark II

Article ID: ART112197 | Date published: 05/11/2015 | Date last updated: 10/04/2018


Paper Jams



Paper Jams

  • If you need to turn off the printer to remove jammed paper during printing, press the RESUME/CANCEL button to cancel print jobs before turning off the printer.

If paper is jammed in the Rear Tray, the Front Tray, or the Front Feed Support:

Remove the paper following the procedure below.

  1. Slowly pull the paper out, either from the Rear Tray or from the Paper Output Slot, whichever is easier.

    Feeding from the Rear Tray:


    Feeding from the Front Tray:


    • If the paper tears and a piece remains inside the printer, open the Top Cover and remove it.

      Be careful not to touch the components inside the printer.

      After removing all paper, close the Top Cover, turn the printer off, and turn it back on.

    • If you cannot pull the paper out, turn the printer off and turn it back on. The paper may be ejected automatically.

  2. Reload the paper, and press the RESUME/CANCEL button on the printer.

    Set the Paper Guide correctly when printing from the Rear Tray. The paper may not feed properly if the Paper Guide is not set correctly.

    If you turned off the printer in step 1, all print jobs in the queue are canceled. Reprint if necessary.

    • When reloading the paper, confirm that you are using the correct paper and are loading it correctly.

      Loading Paper

    • A5 sized paper is suited to printing documents consisting mainly of text. We do not recommend using such paper to print documents with photos or graphics, since the printout may curl and cause paper exit jams.

In other cases:

Make sure of the following:

  • Check 1: Are there any foreign objects around the Paper Output Slot?

  • Check 2: Are there any foreign objects in the Rear Tray?

    If there are any foreign objects in the Rear Tray, be sure to turn off the printer, unplug it from the power supply, then remove the foreign object.

  • Check 3: Is the paper curled?

    Check 3: Load the paper after correcting its curl.


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments