Setting ISO speed

Article ID: ART112395 | Date published: 05/11/2015 | Date last updated: 11/16/2015


Raise the [ISO speed] to use a fast shutter speed when you wish to reduce the effects of camera shake or avoid blurry subjects, or to turn the flash off when shooting in a dark area.


  • •Raising the [ISO Speed] increases the shutter speed and allows the flash to reach subjects at far distances. Therefore, it is possible to shoot images with less subject blur or camera shake even in dark places.
  • However, the higher the [ISO Speed], the more the noise stands out (more uneven areas in an image).
  • Lowering the ISO speed results in sharper images, but there may be an increased chance of subject or image blurring in certain shooting conditions.
  • When the camera is set to [ISO AUTO] (), you can press the shutter button halfway to display the automatically set ISO speed.
  • The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program] ().

Shooting modes in which ISO speed settings can be made

1. Press the <Power> button on the camera.

2. Press the <FUNC./SET> () button.

3. The following screen appears on the LCD monitor.

Operate the <directional buttons> up or down to select an [ISO AUTO] ().

Press the <FUNC./SET> () button or the right <directional button> to display the list of [ISO Speed].

4. Select the [ISO Speed].

Operate the <directional buttons> up or down to select an [ISO Speed]* of your choice.

After the selection is made, press the <FUNC./SET> button ().

* The appropriate [ISO Speed] differs depending on shooting locations. If the camera shake warning icon () appears when you press the <Shutter Button> halfway, it is recommended to gradually raise the ISO speed in increments such as [ISO 100], [ISO 200], etc., and then set the [ISO Speed] when the camera shake warning icon () disappears.

Guidelines when changing the ISO speed
Automatically adjusts the ISO speed to the Shooting mode and shooting conditions.
 Fine weather conditions, outdoor shooting.
 Cloudy, twilight
 Nightscapes, dark interiors

5. If the following icon is shown, the setting is complete (if setting [ISO Speed] to 400).

The shooting modes in which the ISO speed settings can be made are as follows.
... ISO settings can be made.
... The camera does not have this shooting mode.
ModelShooting Modes
PowerShot 300 HS / IXUS 220 HS
PowerShot 100 HS / IXUS 115 HS
PowerShot SX230 HS
PowerShot SX220 HS


  • With [Low Light] () you can set an even faster speed.
  • In [Low Light] mode, depending on the scene, the [ISO speed] is set higher and the shutter speed is set faster than in [AUTO] () mode so that you can shoot in dark places with reduced camera shake and subject blur. This mode is recommended for shooting in candlelit or similarly lit scenes.
  • When [Low Light] mode is set, recording pixels are fixed to () size.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments