Resending Faxes MX340

Article ID: ART112749 | Date published: 05/11/2015 | Date last updated: 08/01/2019


This article provides information on resending faxes from the PIXMA MX340.



There are two methods of redialing: Automatic redialing and Manual redialing.

Automatic Redialing

Manual Redialing

  • It may be possible that faxes will reach unintended recipients due to the misdialing or incorrect registration of fax/telephone numbers. When you send important documents, it is recommended that you send them after speaking on the telephone. For details, see Sending a Fax after Speaking on Telephone.


Automatic Redialing

If you send a document and the recipient's line is busy, the machine will redial the number after a specified interval. Automatic redialing is enabled by default.

You can customize the following automatic redialing settings:

  • Whether or not your machine redials automatically

  • The number of times the machine redials (1 to 10 times)

  • The time interval between redials (1 to 30 minutes)

  • The range of values you can set for the automatic redialing settings varies depending on the country or region of purchase.

  • To cancel automatic redialing, wait until the machine starts redialing, then press the Stop button.

  • To cancel automatic redialing, delete the unsent document from the machine's memory while the machine is on-standby for a redial operation. For details, see Deleting a Document in Memory.


Manual Redialing

Follow the procedure below for manual redialing.

  1. Press the Redial/Pause button.

  2. Use the   button to select the recipient's number to redial, then press the OK button.

  3. Press the Color button for color transmission, or the Black button for black & white transmission.

    • Color transmission is available only when the recipient's fax machine supports color faxing.

  • For manual redialing, the machine memorizes up to 10 recent recipients dialed using the Numeric buttons. Note that the machine does not memorize any recipients dialed using the Coded Dial or Redial/Pause button.

  • To cancel manual redialing, press the Stop button.


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments