Ask a Question

Inserting a Memory Card - MG4120

Article ID: ART113943 | Date published: 05/11/2015 | Date last updated: 08/17/2015
 

Solution

 Important

 When a memory card is inserted into the card slot, the Access lamp is lit. When the Access lamp is flashing, the machine is accessing the memory card. In this case, do not touch the area around the card slot.

 Note

 When Read/write attribute is set to Writable from USB PC or Writable from LAN PC, you cannot print image data from the memory card or save scanned data on the memory card using the operation panel of the machine. After using the card slot as the memory card drive of a computer, remove the memory card, select Device user settings in Device settings of Setup on the HOME screen, then set Read/write attribute to Not writable from PC.

 

 When you use a computer to edit or enhance photos saved on a memory card, be sure to print them from the computer. If you use the operation panel, the photos may not be printed properly.

  1. Prepare your memory card.

Attach a special card adapter if your memory card requires one.

Before Inserting the Memory Card

  1. Turn on the power.

  1. Insert only one memory card into the card slot.

    The location to insert a memory card varies depending on each type of memory card. Insert your memory card straightforward WITH THE LABELED SIDE FACING UP into the card slot, according to the insert location in the figure below.

    When the memory card is inserted properly, the Access lamp (A) will light up.

    Be sure to attach the card adapter for memory card with the mark (asterisk), and then insert it into the card slot as shown below.

    Insert the following types of memory cards into the upper card slot:

     Memory Stick Duo, Memory Stick PRO Duo

     Memory Stick Micro (with the Duo size adapter)Asterisk

    Insert the following types of memory cards into the lower card slot:

     SD Secure Digital memory card, SDHC memory card, MultiMediaCard, MultiMediaCard Plus

     miniSD CardAsterisk, miniSDHC CardAsterisk

     microSD CardAsterisk, microSDHC CardAsterisk

     Memory Stick, Memory Stick PRO

     Memory Stick Micro (with the full size adapter)Asterisk

     RS-MMCAsterisk

     MMCmobileAsterisk

     Important

     Part of the memory card will protrude from the card slot, but do not force it into the slot any further. This can damage the machine or the memory card.

     Make sure that the memory card is correctly oriented before inserting it into the card slot. If you force the memory card into the card slot in the wrong orientation, the memory card or the machine can be damaged.

     Do not insert more than one memory card at a time.


    Rate this Article
    Was this article helpful?
    Yes, This document is helpful
    No, This document needs a clearer explanation
     
    Please provide your comments