There are two methods of redialing: Automatic redialing and Manual redialing.
Automatic Redialing
Manual Redialing
Important
It may be possible that faxes will reach unintended recipients due to the misdialing or incorrect registration of fax/telephone numbers. When you send important documents, it is recommended that you send them after speaking on the telephone. For details, see Sending a Fax after Speaking on Telephone.
Automatic Redialing
You can enable or disable automatic redialing. If you enable automatic redialing, you can specify the maximum number of redial attempts and the length of time the machine waits between redial attempts.
Enable and specify the automatic redialing setting on Auto redial in Advanced FAX settings under Fax settings.
Accessing / Changing Fax Settings
Note
To cancel automatic redialing, wait until the machine starts redialing, then press the Stop button.
To cancel automatic redialing, delete the unsent document from the machine's memory while the machine is on-standby for a redial operation. For details, see Deleting a Document in Memory.
Manual Redialing
Follow the procedure below for manual redialing.
Make sure that the machine is turned on.
Press the FAX button.
The Fax standby screen is displayed.
Load documents on the Platen Glass or in the ADF.
Adjust the scan contrast and resolution as necessary.
Note Press the Redial/Pause button.
The Redial screen is displayed.
Use the 
button to select the recipient's number to redial, then press the OK button.
Press the Color button for color transmission, or the Black button for black & white transmission.
Important
Note
For manual redialing, the machine memorizes up to 10 recent recipients dialed using the Numeric buttons. Note that the machine does not memorize any recipients dialed using the Coded Dial or Redial/Pause button.
To cancel manual redialing, press the Stop button.
