You can register information, including the name of the machine and installation location, that is used for identifying the machine. You can also disable the AirPrint function of the machine. Use the Remote UI to change these settings.

1. Start the Remote UI and log on in System Manager Mode.
Starting Remote UI

NOTE? Depending on your Web browser, the procedure to start the Remote UI may be different. See the instruction manuals for the Web browser you are using.

2. Click [Settings/Registration]. If you are using a mobile device, such as iPad, iPhone, or iPod touch, read "click" as "tap" in this section.

3. Click [Network Settings] [AirPrint Settings].

4. Click [Edit...].

5. Specify the required settings, and click [OK].

[Use AirPrint]
Select the check box to enable printing with AirPrint. To disable AirPrint, clear the check box.
[Printer Name]/[Location]/[Latitude]/[Longitude]
Enter the name and the installation location information to help you identify this machine when operating your Apple device. This information is useful if you have more than one AirPrint printer.
NOTE: Enabling AirPrint
Enabling AirPrint by selecting the [Use AirPrint] check box also enables the <Use HTTP> and <mDNS Settings> (IPv4) settings.

Printer name and location
[Printer Name] and [Location] are reflected in the following settings respectively:

• [Printer Name] can also be set in <mDNS Name>.
• [Location] can also be set in <Location>.

6. Restart the machine. Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.