WPS Push Button Setup - iP7220

Article ID: ART114429 | Date published: 05/11/2015 | Date last updated: 06/15/2023


Learn how to use the WPS Push Button setup method to connect the PIXMA iP7220 to a wireless router.


To set up your printer to connect wirelessly to your network using the WPS Push Button method, follow these steps.

  1. Press and hold the Wi-Fi button (A) on the printer for about 3 to 5 seconds. 

  2. Make sure that the (blue) Wi-Fi lamp flashes quickly and the POWER lamp is lit as shown in the illustration above, then press and hold the button on the access point / wireless router for about 5 seconds within 2 minutes.

  3. Make sure that the (blue) Wi-Fi lamp and POWER lamp are lit.

For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments