Setting up WPS - iP7220

Article ID: ART114429 | Date published: 05/11/2015 | Date last updated: 05/21/2018
 

Description

Setting up WPS - iP7220

Solution

To set up your printer to connect wirelessly to your network using the WPS method, follow these steps.

  1. Press and hold the Wi-Fi button (A) on the printer for about 3 to 5 seconds. 



     
  2. Make sure that the (blue) Wi-Fi lamp flashes quickly and the POWER lamp is lit as shown in the illustration above, then press and hold the button on the access point for about 5 seconds within 2 minutes.

     
  3. Make sure that the (blue) Wi-Fi lamp and POWER lamp are lit.


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments