Adjusting the Feed Amount (iPF6400SE/iPF8400SE)

Article ID: ART114861 | Date published: 05/11/2015 | Date last updated: 10/30/2015


Adjusting the Feed Amount (iPF6400SE/iPF8400SE)


If printed documents are affected by the following problems, try adjusting the feed amount.

  • Banding in different colors
  • Line length is not accurate in the direction paper is fed

To adjust the feed amount, do the following, in this order.

1. Depending on the issue, adjust Adj. Priority to suit the particular type of paper.

2. Execute Adj. Quality or Adjust Length, depending on the selection in Adj. Priority.

3. After executing Adj. Quality, execute Adj. Fine Feed for further adjustment as needed.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments