Manual Banding Adjustment (Adj. Quality) (iPF6400S/iPF8400S)
Article ID: ART115058 | | | Date published: 05/11/2015 | | | Date last updated: 10/30/2015 |
Description
Manual Banding Adjustment (Adj. Quality) (iPF6400S/iPF8400S)
Solution
Manual Banding Adjustment (Adj. Quality) (iPF6400S/iPF8400S) ID
:
8201962700
_
EN
_
2
|
|
Solution |
If printed images are affected by banding in different colors, execute Adj. Quality for adjustment of the paper feed amount.
Use Manual adjustment with highly transparent media or other paper for which Auto(GenuinePpr) or Auto(OtherPaper) cannot be used.
Manual adjustment requires you to enter an adjustment value after a test pattern is printed.
<Paper to Prepare>
When Using Rolls : An unused roll at least 254.0 mm (10.00 in) wide
When Using Sheets : Two sheets of unused paper of at least A4/Letter size
Perform adjustment as follows.
1.Load the paper.
2.On the Tab Selection screen of the Control Panel, press
![]() ![]() ![]() ![]()
3.Press the OK button.
The Set./Adj. Menu is displayed.
4.Press
![]() ![]()
5.Press
![]() ![]()
6.Press
![]() ![]()
7.Press
![]() ![]() Test pattern A is printed for manual adjustment.
8.Examine test pattern A for adjustment. Determine the pattern in which banding is least noticeable.
![]()
9.Press
![]() ![]() Test pattern B is printed for adjustment.
10.Examine test pattern B for adjustment. Determine the pattern in which banding is least noticeable.
11.Press
![]() ![]() The adjustment value is now registered, and adjustment is complete.
|
SIMS Doc Id
8201962700