Adding a Date Stamp when Shooting (PowerShot D30)
Article ID: ART115154 |
| |
Date published: 05/11/2015 |
| |
Date last updated: 11/16/2015 |
Description
Adding a Date Stamp when Shooting (PowerShot D30)
Solution
Adding a Date Stamp when Shooting (PowerShot D30) ID
:
8202048300
_
EN
_
1
|
Solution |
The camera can add the shooting date to the lower-right corner of images.
IMPORTANT
- Note that date stamps cannot be edited or removed, so confirm beforehand that the date and time are correct.
REFERENCE
- For setting or changing the date and time, please click here.
- In some shooting modes it may not be possible to configure the [Date Stamp] setting.
For a list of the shooting modes in which [Date Stamp] setting configuration is possible, please refer to the table below.
The procedure for adding a date stamp to images during shooting is explained below.
1. Press the <Power> button to turn the camera on.
2. Press the < > button, and then choose the [Shooting] ( ) tab.
3. Press the < >< > buttons to choose [Date Stamp], and then press the < >< > buttons to choose [Date] or [Date & Time].
Press the < > button.
4. When [Date Stamp] is set to [Date] or [Date & Time], [Date] is displayed on the LCD monitor.
5. The [Date Stamp] will be added to the images as shown below:
[Date]
[Date & Time]
NOTE
It is not possible to edit the displayed date, color, style, or position of date stamps.
Shooting modes in which the [Date Stamp] setting can be configured:
...[Date Stamp] can be added
Model | Shooting Mode |
|
|
|
|
|
|
|
|
|
|
PowerShot D30 |
|
|
|
|
|
|
|
|
|
|
|