How to set High-Speed Continuous Shooting (High-speed Burst HQ) You can shoot a series of shots in rapid succession by holding the shutter button all the way down. You can shoot at a maximum speed of approx. 8.5 shots/sec. * Up to four shots at once during continuous shooting IMPORTANT The drive mode is [ ] in mode and cannot be changed.
NOTE - HQ: High Quality
- Focus, image brightness, and color are determined by the first shot.
- The screen is blank while you are shooting.
- There may be a delay after continuous shooting before you can shoot again. Note that some types of memory cards may delay your next shot even longer. SD Speed Class 6 or higher memory cards are recommended.
- Shooting may slow down depending on shooting conditions, camera settings, and the zoom position.
1. Press the power button to turn the camera on, and then set the <Mode Dial> to ( ). 2. Press the <FUNC./SET> ( ) button. 3. Press the < >< > buttons or turn the < > dial to choose [Shooting Mode]. Press the <FUNC./SET> ( ) button. (If no changes have been made to the initial settings, [Portrait] ( ) will be displayed. 4. Press the < >< > buttons or turn the < > dial to choose [High-speed Burst HQ] ( ), and then press the <FUNC./SET> ( ) button. 5. If the [High-speed Burst HQ] ( ) icon is displayed on the upper-left part of the screen, the setting is completed. As long as you hold the <shutter button> down, the camera will shoot successive images. - Shooting stops when you release the shutter button or reach the maximum number of shots, after which [Busy] is displayed and the shots are shown in the order you took them.
Viewing Each Image in a Group (Group Playback) Images shot in [High-speed Burst HQ] ( ) mode are grouped for display, and these grouped images can be viewed one at a time. IMPORTANT If you erase a grouped image, all images in the group are also erased. Be careful when erasing images.
REFERENCE - To view images shot in [High Speed Burst EQ] () as a group, press the <MENU> () button, choose [Group Images] on the [Playback] () tab, and then choose [ON]. (The setting is [ON] by default.)
1. Choose a grouped image. Press the < >< > buttons or turn the < > dial to choose an image labeled with [ ]. Press the <FUNC./SET> ( ) button. 2. Press the < >< > buttons or turn the < > dial to choose [Group Playback] ( ), and then press the <FUNC./SET> ( ) button. 3. Pressing the < >< > buttons or turning the < > dial will display only images in the group. To cancel group playback, press the <FUNC./SET> ( ), choose [ ] in the menu, and press the <FUNC./SET> ( ) button again. |