Video Output Signals by Terminal (XF305/XF300)

Article ID: ART115385 | Date published: 05/11/2015 | Date last updated: 08/15/2015
 

Description

Video Output Signals by Terminal (XF305/XF300)

Solution

The video signal output from the HD/SD SDI ( only), HDMI OUT and HD/SD COMPONENT OUT terminals depends on the clips video configuration, the capability of the external monitor (for video output from the HDMI OUT terminal) and on various menu settings. Video output from the AV or VIDEO 2 terminal will always be in 480/60i standard.

Video Output Signals by Terminal

Refer to the following table for the video output Signal from each terminal. If necessary, you can superimpose the onscreen displays on the video displayed on the external monitor.
Recording frame size / Frame rate HD/SD SDI Terminal(*1)(*2) HDMI OUT Terminal(*2)(*3) HD/SD COMPONENT OUT Terminal(*2)(*4)AV Terminal or VIDEO 2 Terminal
HD outputSD outputHD outputSD outputHD outputSD outputSD output
1080/60i
1080/30P
1080/24P
1080/S&F Frame Rate
1080/60i 480/60i(*5) 1080/60i 480/60P 1080/60i 480/60i 480/60i
720/60P
720/30P
720/24P
720/S&F Frame Rate
720/60P 480/60i(*5) 720/60P 480/60P 720/60P 480/60i 480/60i

*1: Set [Video Setup] -> [SDI Output] to [HD], [SD] or [Off].
*2: When you set [LCD/VF Setup] [HD Output] (under [Zebra]) to [On], you can display zebra patterns on an external monitor. In such case, output from the HD/SD SDI terminal ( only) and HD/SD COMPONENT OUT terminal will be in HD, regardless of their setting.
*3: Video output will automatically switch to HD or SD, depending on the capability of the external monitor.
*4: Set [Video Setup] -> [Component Output] to [HD] or [SD].
*5: When output from the HDMI OUT terminal is SD (480/60P), the output of the HD/SD SDI terminal will also be 480/60P.


SIMS Doc Id

8200841600

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments