Replacing the Maintenance Cartridge (iPF8400S)
Article ID: ART115576 | | | Date published: 05/11/2015 | | | Date last updated: 08/15/2015 |
Description
Replacing the Maintenance Cartridge (iPF8400S)
Solution
Replacing the Maintenance Cartridge (iPF8400S) ID : 8202005900 _ EN _ 1 | |
Solution | Compatible maintenance cartridges Maintenance Cartridge MC-08 ![]() Precautions when handling the Maintenance Cartridge Take the following precautions when handling the Maintenance Cartridge.
Confirm the message When the Maintenance Cartridge is almost empty, a message is shown on the Display Screen. According to the message, replace the Maintenance Cartridge or prepare a new Maintenance Cartridge. ![]() If a message is displayed requesting Maintenance Cartridge replacement, you can skip the step Access the menu for Maintenance Cartridge replacement. Follow the instructions in Replace the Maintenance Cartridge. ![]() Access the menu for Maintenance Cartridge replacement 1. On the Tab Selection screen of the Control Panel, press ![]() ![]() ![]() ![]()
2. Press the OK button. The Set./Adj. Menu is displayed. 3. Press ![]() ![]() 4. Press ![]() ![]() Instructions are displayed on the Display Screen. Replace the Maintenance Cartridge 1. Open the box, remove the plastic bag, packaging material, and Shaft Cleaner, and then take out the Maintenance Cartridge. ![]()
2. At this point, open the Maintenance Cartridge Cover. ![]() 3. Hold the used Maintenance Cartridge by the grip (a) with one hand and put your other hand under the Maintenance Cartridge to hold it firmly on the bottom, keeping it level as you pull it out. ![]()
4. Attach the packaging material to the used Maintenance Cartridge and put it in the box. Keep it level as you put it in the plastic bag. Expel excess air from the plastic bag and seal the zipper. ![]() 5. Confirm the Maintenance Cartridge is right-side up, put it in the box, and store it so that it stays level. ![]()
6. Wipe away any soiling on the Maintenance Cartridge Cover. ![]()
7. Keeping the new Maintenance Cartridge level, insert it all the way in. The printer now initializes the Maintenance Cartridge. ![]()
8. Close the Maintenance Cartridge Cover. ![]()
9. Press the OK button. Next, replace the Shaft Cleaner. ![]() Replacing the Shaft Cleaner Replace the Shaft Cleaner when you replace the Maintenance Cartridge. New Shaft Cleaner is included with replacement Maintenance Cartridge. After you execute Repl. maint cart and replace the Maintenance Cartridge, a message will appear on the Display Screen requesting you to replace the Shaft Cleaner. Select Yes and press the OK button. When a message requests you to open the Top Cover, go to step 5. 1. On the Tab Selection screen of the Control Panel, press ![]() ![]() ![]() ![]()
2. Press the OK button. The Set./Adj. Menu is displayed. 3. Press ![]() ![]() 4. Press ![]() ![]() The Carriage moves. When it finishes moving, instructions are displayed on the Display Screen. 5. Open the Top Cover. ![]()
6. Hold the Shaft Cleaner on the right side of the Carriage by the grips (a) and pull it to the right to remove it. ![]()
7. Holding the new Shaft Cleaner by the grips (a), attach it to the Carriage. ![]()
8. Close the Top Cover. The Carriage moves back into position. ![]() |
SIMS Doc Id
8202005900