How to Set the Peaking (Emphasizing the Outline of Objects) Color, Gain, and Frequency? (XF305/XF300)

Article ID: ART115818 | Date published: 05/12/2015 | Date last updated: 08/15/2015
 

Description

How to Set the Peaking (Emphasizing the Outline of Objects) Color, Gain, and Frequency? (XF305/XF300)

Solution

This section explains the details on how to set the peaking (emphasizing the outline of objects) color, gain, and frequency.
NOTE
There are two peaking levels: [Peaking 1] and [Peaking 2]. You can press the <MENU> button to display the [LCD/VF Setup] menu, and then press [Select] to switch between the peaking levels.

Hold down the button on the <POWER> switch and move it to <CAMERA>.

Setting the peaking color

1. Press the <MENU> button.

2. Select [LCD/VF Setup] -> [Peaking 1] -> [Peaking 2] in that order.
Push the <joystick> up/down or turn the <SELECT> dial to select the desired submenu, and then press <SET>.


3. Select the color and then press <SET>.
[White], [Red], [Yellow], [Blue]

4. Press the <MENU> button to close the menu.

Setting the peaking gain

1. Press the <MENU> button.

2. Select [LCD/VF Setup] -> [Peaking 1] or [Peaking 2] in that order.

3. Select [Gain], and then select [Off] or any value between [1] to [15].

4. Press the <MENU> button to close the menu.

Setting the peaking frequency

1. Press the <MENU> button.

2. Select [LCD/VF Setup] -> [Peaking 1] or [Peaking 2] in that order.

3. Select [Frequency], and then select from [1] to [4].

4. Press the <MENU> button to close the menu.


SIMS Doc Id

8200846200

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments