Video Output Signals by Terminal (XF200 / XF205)

Article ID: ART115833 | Date published: 05/12/2015 | Date last updated: 08/15/2015
 

Description

Video Output Signals by Terminal (XF200 / XF205)

Solution

The video signal output from the 3G/HD-SDI terminal*, MON. terminal*, HDMI OUT and AV OUT terminals depends on the clips video configuration, the capability of the external monitor (for video output from the HDMI OUT terminal) and on various menu settings.
* only.

Recording Video Signal Configuration and Video Output Configuration by Terminal

Refer to the following table for the video output configuration from each terminal, depending on the recording video configuration used.
3G/HD-SDI terminal and MON. terminal
Recording video configuration3G/HD-SDI terminal outputMON. terminal output *1
Bit rateFrame rate3G/HD-SDI setting *2MON. setting *3
DirectCompatibleHD *4SD
1920x108059.94P *51080/59.94P1080/59.94i1080/59.94i480/59.94i
59.94i *61080/59.94i
29.97P1080/29.97P1080/29.97PsF1080/29.97PsF
23.98P1080/23.98P1080/59.94i1080/59.94i
1280x72059.94P720/59.94P720/59.94P720/59.94P
29.97P720/29.97P
23.98P720/23.98P

*1: Onscreen displays can be superimposed and output to an external monitor.
*2: [ Video Setup] -> [3G/HD-SDI].
*3: [ Video Setup] -> [MON.].
*4: The zebra pattern can be output to an external monitor.
*5: MP4 clips only.
*6: MXF clips only.

HDMI OUT terminal and AV OUT terminal

Recording video configurationHDMI OUT terminal output *1AV OUT terminal output *1 (SD output)
Bit rateFrame rateMON. setting *2
HD *3SDOff *4
1920x108059.94P *51080/59.94P *7480/59.94i1080/59.94P *7480/59.94i
59.94i *61080/59.94i1080/59.94i or
480/59.94P
29.97P
23.98P
1280x72059.94P720/59.94P720/59.94P or
480/59.94P
29.97P
23.98P

*1: Onscreen displays can be superimposed and output to an external monitor.
*2: [ Video Setup] -> [MON.].
*3: The zebra pattern can be output to an external monitor.
*4: The video signal will change automatically depending on the capability of the external monitor.
*5: MP4 clips only.
*6: MXF clips only.
*7: Only when [ Video Setup] -> [3G/HD-SDI] is set to a setting other than [Compatible] and [ Video Setup] -> [HDMI] is set to [+1920x1080 59.94P].

Playback Video Configuration and Video Output Configuration by Terminal

Refer to the following tables for the video output configuration from each terminal, depending on the video configuration of the clip being played back.
3G/HD-SDI terminal and MON. terminal
Video configuration of the clip3G/HD-SDI terminal outputMON. terminal output *1
Movie formatBit rateFrame rateMON. setting *2
HDSD
MXF1920x108059.94i/29.97P/23.98P1080/59.94i1080/59.94i480/59.94i
1280x72059.94P/29.97P/23.98P720/59.94P720/59.94P
MP41920x1080/1280x720/640x36059.94P/29.97P/23.98P1080/59.94P1080/59.94i

*1: Onscreen displays can be superimposed and output to an external monitor.
*2: [ Video Setup] -> [MON.].

HDMI OUT terminal and AV OUT terminal

Video configuration of the clipHDMI OUT terminal output *1AV OUT terminal output *1 (SD output)
Movie formatBit rateFrame rateMON. setting *2
HDSDOff *3
MXF1920x108059.94i/29.97P/23.98P1080/59.94i480/59.94i1080/59.94i or 480/59.94i480/59.94i
1280x72059.94P/29.97P/23.98P720/59.94P720/59.94P or 480/59.94i
MP41920x1080/1280x720/640x36059.94P1080/59.94P *41080/59.94P4
1080/59.94i or 480/59.94i
29.97P/23.98P1080/59.94i

*1: Onscreen displays can be superimposed and output to an external monitor.
*2: [ Video Setup] -> [MON.].
*3: The video signal will change automatically depending on the capability of the external monitor.
*4: Only when [ Video Setup] -> [HDMI] is set to [+1920x1080 59.94P].


SIMS Doc Id

8202080300

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments