Choosing Subjects to Focus On (Touch AF) (PowerShot G7 X)

Article ID: ART116054 | Date published: 05/12/2015 | Date last updated: 08/15/2015
 

Description

Choosing Subjects to Focus On (Touch AF) (PowerShot G7 X)

Solution

You can shoot after choosing a persons face or another subject to focus on.
IMPORTANT
  • The following section explains the setting procedures when the cameras shooting mode has been set to [Program AE] ().
Shooting modes in which Touch AF is possible

1. Turn the camera on.

2. Press the <> button.

3. Press the <>< > buttons to choose the [Shooting] () tab.
Press the <><> buttons to choose [AF Frame], and then press the <><> buttons to set [Face AiAF].
After completing the above settings, press the <> button.


4. Choose a persons face or another subject to focus on, and touch the subject or person on the screen.

- When the subject is detected, the camera beeps and () is displayed. Focus is maintained even if the subject moves.
To cancel Touch AF, touch ().

5. Shoot.

  • Press the shutter button halfway. After the camera focuses, () changes to a green ().
  • Press the shutter button all the way down to shoot.

IMPORTANT
  • If you prefer the camera not to shoot when you touch the screen, make sure [Touch Shutter] mode is deactivated. Press the () button, choose [Touch Shutter] on the () tab, and then choose [Off].
  • Tracking may not be possible when subjects are too small or move too rapidly, or when there is inadequate contrast between subjects and the background.
  • Even if you are shooting in (), the camera will revert to () mode if you touch the screen to specify where to focus.
  • If [Face ID] is set to [On], names will not display when registered people are detected, but the names will be recorded in the still images. However, a name will display if the subject chosen to focus on is the same as a person detected with Face ID.

NOTE
Touch AF is possible in the following shooting modes:
, , , , , , , , , (*1), (*2), (*2), , (*3), (*3), (*3), , , , , , , , , (*3),
*1: Only when [MF] is selected.
*2: Only available when faces are detected.
*3: Only in manual focus mode.


SIMS Doc Id

8202188000

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments