Easily Composing Shots after Manual Zooming (Framing Assist – Lock) (PowerShot SX60 HS)
| Article ID: ART116142 |
| |
Date published: 05/12/2015 |
| |
Date last updated: 08/15/2015 |
Description
Easily Composing Shots after Manual Zooming (Framing Assist – Lock) (PowerShot SX60 HS)
Solution
| Easily Composing Shots after Manual Zooming (Framing Assist Lock) (PowerShot SX60 HS) ID
:
8202184300
_
EN
_
2
|
| Solution |
You can reduce camera shake at the telephoto end, which makes it easier to compose shots.
1. Press the <Power> button to turn the camera on.
2. Zoom out to the telephoto end and press the <  > button.
Press and hold the < > button. [ ] is displayed, and image stabilization optimal for shooting at the telephoto end is applied.
REFERENCE
To fine-tune the size of subjects gradually, move the zoom lever while holding down the < > button.
3. While holding the < > button, press the shutter button halfway to focus on the subject, and then press it all the way down.
4. Press the shutter button down fully to shoot.
IMPORTANT
- The zoom factor cannot be adjusted by pressing the <
 > button while you are holding down the < > button.
- Recomposing the shot while holding down the <> button may make image stabilization less effective. In this case, [ ] is displayed in gray. If this occurs, release the <> button, compose the shot, and then press it again.
- If you start recording a movie while holding down the <> button, image stabilization may cause the shot to be recomposed. Please do not hold down the <> button while shooting movies.
NOTE
Although no image stabilization icon is shown while you hold down the < > button, image stabilization optimal for shooting at the telephoto end is applied.
|
