Printing Out Network Setting Information - MG6620 / MG7520

 

Description

This article explains how to print a Network Configuration Page on the PIXMA MG6620 and MG7520.  An example of this page is attached to this article.

 Note
The example attached to this article is from the PIXMA MG7520.  The PIXMA MG6620 is not a wired LAN capable model, so its page will not show anything regarding wired LAN information.

Solution

Note: The steps listed below are specific to the MG6620 and MG7520 printers.  For instructions for other models, click here

You can print out the current network settings of the machine using the operation panel of the machine.

Important

  • This print out contains valuable information about your computer. Handle it with care.

    1. Make sure that the machine is turned on.

    2. Load a sheet of A4 or Letter-sized plain paper.

    3. Flick the HOME screen, then tap Setup.

       

    4. Tap Device settings.

    5. Tap LAN settings.

    6. Tap Confirm LAN settings.

    7. Tap Print LAN details.

    8. Tap Yes.

      The machine starts printing the network setting information.

      The following information on the machine's network setting is printed out.

      Item

      Explanations of the item

      Setting

      Wireless LAN

      Wireless LAN

      Enable/Disable

      Connection

      Connection status

      Active/Inactive

      MAC Address

      MAC Address

      XX:XX:XX:XX:XX:XX

      SSID

      SSID

      SSID of the wireless LAN/SSID of the access point mode

      Password

      Password

      Password of the access point mode (8 to 10 alphanumeric characters)

      Communication Mode

      Communication Mode

      Infrastructure/Access Point Mode

      Channel *1

      Channel

      XX (1 to 13)

      Encryption

      Method of the Encryption

      none/WEP/TKIP/AES

      WEP Key Length

      WEP Key Length

      Inactive/128/64

      Authentication

      Method of the Authentication

      none/auto/open/shared/WPA-PSK/WPA2-PSK

      Signal Strength

      Signal Strength

      0 to 100 [%]

      TCP/IP Version

      TCP/IP Version

      IPv4 & IPv6/IPv4

      IPv4 IP Address

      Selected IP Address (IPv4)

      XXX.XXX.XXX.XXX

      IPv4 Default Gateway

      Default Gateway (IPv4)

      XXX.XXX.XXX.XXX

      Subnet Mask

      Subnet Mask

      XXX.XXX.XXX.XXX

      IPv6 IP Address *2

      Selected IP Address (IPv6)

      XXXX:XXXX:XXXX:XXXX
      XXXX:XXXX:XXXX:XXXX

      IPv6 Default Gateway *2

      Default Gateway (IPv6)

      XXXX:XXXX:XXXX:XXXX
      XXXX:XXXX:XXXX:XXXX

      Subnet Prefix Length *2

      Subnet Prefix Length

      XXX

      IPsec *3

      IPsec setting

      Active

      Security Protocol *3

      Method of the Security Protocol

      ESP/ESP & AH/AH

      Wireless LAN DRX

      Discontinuous reception (wireless LAN)

      Enable/Disable

      Other Settings

      Other settings

      -

      Printer Name

      Printer name

      Printer name (Up to 15 alphanumeric characters)

      Shared Memory Card

      Memory card sharing

      Enable/Disable

      WSD

      WSD setting

      Enable/Disable

      WSD Timeout

      Timeout

      1/5/10/15/20 [min]

      LPR Protocol

      LPR protocol setting

      Enable/Disable

      Bonjour

      Bonjour setting

      Enable/Disable

      Bonjour Service Name

      Bonjour service name

      Bonjour service name (Up to 52 alphanumeric characters)

      PictBridge Commun.

      PictBridge Communication

      Enable/Disable

      DNS Server

      Getting DNS Server automatically

      Auto/Manual

      Primary Server

      Primary server address

      XXX.XXX.XXX.XXX

      Secondary Server

      Secondary server address

      XXX.XXX.XXX.XXX

      Proxy Server

      Proxy Server setting

      Enable/Disable

      Proxy Port

      Specifying Proxy Port

      1 to 65535

      Proxy Address

      Proxy Address

      XXXXXXXXXXXXXXXXXXXX

      ("XX" represents alphanumeric characters.)

      *1 Depending on the country or region of purchase, one of the channels from 1 to 11 is printed.

      *2 Only when IPv6 is enabled, the status of the network is printed.

      *3 Only IPv6 and the IPsec setting are enabled, the status of the network is printed.


PIXMA MG Series Printers Support

Attachment

MG7520_NW_Info.pdf
27K • < 1 minute @ 56k, < 1 minute @ broadband



Doc ID   ART116179
Updated   04/19/2019

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments