Adjusting Exposure Compensation (PowerShot SX520 HS)

Article ID: ART116244 | Date published: 05/12/2015 | Date last updated: 08/15/2015


Adjusting Exposure Compensation (PowerShot SX520 HS)


The standard exposure set by the camera can be adjusted in 1/3-stop increments, in a range of 2 to +2.
  • In the following example procedure, the camera's shooting mode has been set to [Program AE] () mode.

For a list of shooting modes in which exposure compensation cannot be set, please refer to the table at the bottom of the page.

1. Press the <Power> button to turn the camera on.

2. Press the <> button.

3. As you watch the screen, turn the <> dial to adjust brightness, and then press the <> button again when finished.

4. The exposure compensation amount that you set is displayed.

Exposure compensation cannot be set in the following shooting modes.
ModelShooting Mode
PowerShot SX520 HS , , , , ,



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments