Installing the Toner Cartridge_16

Article ID: ART116292 | Date published: 05/12/2015 | Date last updated: 11/16/2015
 

Description

Installing the Toner Cartridge

Solution

WARNING
  • Do not dispose of used toner cartridges in open flames. Also, do not store toner cartridges or paper in a location exposed to open flames. This may cause the toner to ignite, and result in burns or fire.
  • If you accidentally spill or scatter toner, carefully wipe up the loose toner with a damp, soft cloth and avoid inhaling any toner dust. Do not use a vacuum cleaner that is not equipped with safety measures to prevent dust explosions to clean up loose toner. Doing so may cause damage to the vacuum cleaner or result in a dust explosion due to static discharge.
If you are using a cardiac pacemaker
  • Toner cartridges generate a low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, please move away from toner cartridges and consult your physician immediately.

CAUTION
  • Use caution not to inhale any toner. If you should inhale toner, consult a physician immediately.
  • Use caution so that toner does not get into your eyes or mouth. If toner should get into your eyes or mouth, immediately wash with cold water and consult a physician.
  • Use caution so that toner does not come into contact with your skin. If it should, wash with soap and cold water. If there is any irritation on your skin, consult a physician immediately.
  • Keep the toner cartridges and other consumables out of the reach of small children. If toner is ingested, consult a physician or poison control center immediately.
  • Do not disassemble or modify the toner cartridge. Doing so may cause the toner to scatter.
  • Remove the sealing tape of the toner cartridge completely without using excessive force. Doing otherwise may cause the toner to scatter.

Preparing Toner Cartridges

1. Lift the operation panel.
If you cannot lift the operation panel
  • Make sure the feeder or platen glass cover is completely closed. If a thick original such as a book is placed on the platen glass, remove the original. Forcing the operation panel up may cause damage.

2. Open the toner cover by the grip at the front right of the toner cover.

Bris_US_T_b_Brs085.gif

3. Pull the toner cartridge out of the machine.

Bris_US_T_b_Brs086.gif

4. Remove the replacement toner cartridge from the protective bag.

Bris_US_T_b_SWD_0083.gif

5. Shake the toner cartridge 5 or 6 times as shown below to evenly distribute the toner inside the cartridge, and then place it on a flat surface.

Bris_US_T_b_SWD_0013.gif

6. Pull the sealing tape straight out.
  • The full length of the sealing tape is approximately 19 3/4" (50 cm).

Bris_US_T_b_SWD_0015.gif

When pulling out the sealing tape
  • If the sealing tape remains inside the toner cartridge, the quality of printouts, including faxes, may deteriorate. Also note that it will not be possible to reprint a fax because the fax function automatically deletes data once it is printed.
- Do not pull out the sealing tape at an angle or sideways. If the tape breaks, you may not be able to pull it out completely.

Bris_US_T_b_SSL_0196.gif

- If the sealing tape becomes stuck when pulling it out, keep pulling until it is completely removed.

7. Install the toner cartridge.
  • Align the right and left projections ( ) with the toner cartridge guides, and push securely all the way in.

Bris_US_T_b_Brs087.gif

8. Close the toner cover, and lower the operation panel.
If you cannot close the toner cover
  • Make sure that the toner cartridge is inserted properly. Forcing it closed may cause damage.


SIMS Doc Id

8202172600

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments