This section explains the details on how to set the peaking (emphasizing the outline of objects) color, gain, and frequency. NOTE There are two peaking levels: [Peaking 1] and [Peaking 2]. You can press the <MENU> button to display the [ OLED/VF] steup menu, and then press [Select] to switch between the peaking levels.
Hold down the button on the <POWER> switch and move it to <CAMERA>. Setting the Peaking Color 1. Press the <MENU> button. 2.Select [ OLED/VF Setup] -> [Peaking 1] or [Peaking 2] in that order. Push the <joystick> up/down to select the desired submenu, and then press <SET>. : Joystick : In the following procedures, 'Press <SET>' refers to the action of pressing the joystick straight down to select the desired setting. 3.Select [Color], and choosethe desired color ([White], [Red], [Yellow], [Blue]). 4. Press the <MENU> button to close the menu. Setting the Peaking Gain 1. Press the <MENU> button. 2. Select [ OLED/VF Setup] -> [Peaking 1] or [Peaking 2] in that order. 3. Select [Gain], and then select [Off] or any value between [1] to [15]. 4. Press the <MENU> button to close the menu. Setting the Peaking Frequency 1. Press the <MENU> button. 2. Select [ OLED/VF Setup] -> [Peaking 1] or [Peaking 2] in that order. 3. Select [Frequency], and then select from [1] to [4]. 4. Press the <MENU> button to close the menu. |