How to Set the Peaking (Emphasizing the Outline of Objects) Color, Gain, and Frequency (XF200 / XF205)
Article ID: ART116647 | Date published: 05/12/2015 | Date last updated: 08/15/2015
 

Description

How to Set the Peaking (Emphasizing the Outline of Objects) Color, Gain, and Frequency (XF200 / XF205)

Solution

This section explains the details on how to set the peaking (emphasizing the outline of objects) color, gain, and frequency.
NOTE
There are two peaking levels: [Peaking 1] and [Peaking 2]. You can press the <MENU> button to display the [ OLED/VF] steup menu, and then press [Select] to switch between the peaking levels.

Hold down the button on the <POWER> switch and move it to <CAMERA>.

Setting the Peaking Color

1. Press the <MENU> button.

2.Select [OLED/VF Setup] -> [Peaking 1] or [Peaking 2] in that order.
Push the <joystick> up/down to select the desired submenu, and then press <SET>.


: Joystick
: In the following procedures, 'Press <SET>' refers to the action of pressing the joystick straight down to select the desired setting.

3.Select [Color], and choosethe desired color ([White], [Red], [Yellow], [Blue]).

4. Press the <MENU> button to close the menu.

Setting the Peaking Gain

1. Press the <MENU> button.

2. Select [ OLED/VF Setup] -> [Peaking 1] or [Peaking 2] in that order.

3. Select [Gain], and then select [Off] or any value between [1] to [15].

4. Press the <MENU> button to close the menu.

Setting the Peaking Frequency

1. Press the <MENU> button.

2. Select [ OLED/VF Setup] -> [Peaking 1] or [Peaking 2] in that order.

3. Select [Frequency], and then select from [1] to [4].

4. Press the <MENU> button to close the menu.

SIMS Doc Id

8202101400