Printer Cannot be Used after the Access Point is Replaced or the Settings are Changed - iP110
Article ID: ART116693 | Date published: 05/12/2015 | Date last updated: 05/10/2019


If your PIXMA iP110 stopped working after changing a setting in your wireless router, or getting a new wireless router, it will need to be reconfigured for wireless use.



When an access point or router is replaced, or when the security settings of the access point are changed (e.g. from WEP to WPA2), you need to re-connect the printer to the access point or router via wireless LAN.

The connection method is determined by the type of access point.

[ Wireless LAN connection of your printer to an access point ], connect the printer to the access point