Adjusting Exposure Compensation (PowerShot SX60 HS)
| Article ID: ART116714 |
| |
Date published: 05/12/2015 |
| |
Date last updated: 08/15/2015 |
Description
Adjusting Exposure Compensation (PowerShot SX60 HS)
Solution
| Adjusting Exposure Compensation (PowerShot SX60 HS) ID
:
8202167600
_
EN
_
1
|
| Solution |
The standard exposure set by the camera can be adjusted in 1/3-stopincrements, in a range of 3 to +3.
IMPORTANT
- The following section explains the setting procedures when the cameras shooting mode has been set to [Program AE] (
 ).
For a list of shooting modes in which exposure compensation cannot be set, please refer to the table at the bottom of the page.
1. Press the <Power> button to turn the camera on.
2. Press the <  > button.
3. As you watch the screen, turn the <  > dial to adjust brightness, and then press the < > button again when finished.
4. The correction level you specified is now displayed.(-1 has been selected in the example image below.)
Exposure compensation cannot be set in the following shooting modes.
| Model | Shooting Mode |
|---|
| PowerShot SX60 HS |
,
,
,
,
,
,
,
|
|
