| Article ID: ART116725 |
| |
Date published: 05/12/2015 |
| |
Date last updated: 08/15/2015 |
Description
Setting the flash to fire for each shot (PowerShot SX60 HS)
Solution
| Setting the flash to fire for each shot (PowerShot SX60 HS) ID
:
8202165100
_
EN
_
1
|
| Solution |
When setting [Flash] to [Auto], [Flash] is not activated if the surroundings are light. However, when shooting with the subject backlit, [Flash] is sometimes used not to make the subject dark. This section describes the setting to shoot the shots with constant flash.
IMPORTANT
- The following example shows the procedure when the cameras shooting mode has been set to [Program AE] (
 ).
- The [Flash] cannot be set to [On] in the following shooting modes:
[Hybrid Auto] (  ), [Auto] (  ), [Creative Shot] (  ), [Sports] (  ), [Low Light] (  ), [Fireworks] (  ), [High Dynamic Range] (  ), [Movie ] (  ), [Manual (Movie)] (  ), iFrame Movies (  ), [Super Slow Motion Movie] (  )
1. Press the <Power> button to turn the camera on.
2. Lift the flash with your finger.
3. Press the <Flash> (  ) button.
IMPORTANT
- The setting screen cannot be accessed by pressing the <Flash> () button when the flash is lowered. Lift the flash with your finger in advance.
- If the flash fires, vignetting may occur.
4. Press the <  ><  > buttons to choose [On] (  ).
5. The option you configured is now displayed.
|
