IMPORTANT

• [Servo AF] is set to [On] and cannot be changed.
• Tracking may not be possible when subjects are too small or move too rapidly, or when subject color or brightness matches that of the background too closely.
• [AF-Point Zoom] on the [ ] tab of the MENU is not available.
• In the following example procedure, the camera's shooting mode has been set to [Program AE] ().

2. Press the <> button, choose [AF Frame] on the [Shooting] ( ]) tab, and then choose the [Tracking AF].

Then, press the <> button.

3. () is displayed in the center of the screen. Aim the camera so that () is on the desired subject, and then press the [AF frame selector] <> button.

- When the subject is detected, the camera beeps and () is displayed. Even if the subject moves, the camera will continue to track the subject within a certain range.

- If no subject is detected, () is displayed.

REFERENCE

• To cancel tracking, press the () [AF Frame Selector] <> button again.
• The camera can detect subjects even if you press the shutter button halfway without pressing the < > button. After your shot, () is displayed in the center of the screen.
• If [Face ID] is set to [On], names will not display when registered people are detected, but the names will be recorded in the still images. However, a name will display if the subject chosen to focus on is the same as a person detected with Face ID.

4. Press the shutter button halfway. () changes to a blue () which follows the subject as the camera continues to adjust the focus and exposure (Servo AF).

- Even after your shot, () is still displayed and the camera continues to track the subject.

Model	Shooting modes in which Tracking AF is possible
PowerShot SX60 HS	*1, *1, , , , , *2, , , , , , , , ,

*1 Options vary depending on the assigned shooting mode.
*2 Only available by pressing the [