Ask a Question

Cleaning the Print Head from the Operation Panel - iP110

Article ID: ART117204 | Date published: 05/12/2015 | Date last updated: 05/09/2019
 

Description

This article explains how to use the operation panel of the iP110 to clean the print head.  This can help if you experience streaked prints or incorrect / missing colors.

 

Solution

Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head consumes ink, so clean the print head only when necessary.

  1. Make sure that the power is turned on.

  2. Hold down the RESUME/CANCEL button until the POWER lamp flashes once, then release it immediately.

    The printer starts cleaning the print head.

    The cleaning will be complete when the POWER lamp lights after flashing.

    Do not perform any other operations until the printer completes the cleaning of the print head. This takes about 1 to 2 minutes.

  3. Check the print head condition.

    Print the nozzle check pattern to check the print head condition.


Note


 

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments