| Article ID: ART117223 |
| |
Date published: 05/12/2015 |
| |
Date last updated: 09/21/2015 |
Description
Adjusting Exposure Compensation (PowerShot SX400 IS / PowerShot SX410 IS)
Solution
| Adjusting Exposure Compensation (PowerShot SX400 IS / PowerShot SX410 IS)
ID : 8202115200 _ EN _ 2
|
| Solution |
The standard exposure set by the camera can be adjusted in 1/3-stop increments, in a range of 2 to +2.
IMPORTANT
- In the following example proceure, the camera's shooting mode has been set to [Program AE] (
 ) mode.
- Exposure compensation cannot be adjusted in the shooting modes listed below:
-[Auto] (  ), [Poster Effect] (  ), [Long Shutter] (  )
1. Press the <Power> button to turn the camera on.
2. Press the [  ] button.
3. As you watch the screen, press the [  ], [  ] buttons to adjust the brightness.
 When shooting movies, shoot with the exposure compensation bar displayed.
4. When shooting still images, press the [  ] button to display the set exposure compensation amount, and then shoot.
NOTE
- You can also shoot still images with exposure compensation bar displayed.
- While recording a movie, [
 ] is displayed, and the exposure is locked.
|
