Switching Shooting Modes (PowerShot SX600 HS / PowerShot SX610 HS)
Article ID: ART117253 | | | Date published: 05/12/2015 | | | Date last updated: 08/15/2015 |
Description
Switching Shooting Modes (PowerShot SX600 HS / PowerShot SX610 HS)
Solution
Switching Shooting Modes (PowerShot SX600 HS / PowerShot SX610 HS) ID
:
8201998900
_
EN
_
3
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Solution |
The procedure for switching shooting modes is explained below.
Switching to Auto (Smart Auto) Mode 1. Press the power button to turn the camera on.
2. Set the mode switch to [ ].
3. Press the < FUNC./SET > [ ] button, press the [ ], [ ] buttons to choose [ ], and then press the < FUNC./SET > [ ] button again.
Press the [ ], [ ] buttons to choose [ ], and then press the < FUNC./SET > [ ] button.
Aim the camera at the subject. The camera will make a slight clicking noise as it determines the scene.
Icons representing the scene and image stabilization mode are displayed in the upper right of the screen.
Frames displayed around any detected subjects indicate that they are in focus.
Switching to Hybrid Auto Mode You can make a short movie of the day (digest movie). Just by shooting still images, the camera will automatically record a movie clip of the scene immediately before each shot.
1. Press the power button to turn the camera on.
2. Set the mode switch to [ ].
To beautifully capture a digest movie, which is created by automatically recording about 2 4 seconds of the scene before each shot, aim the camera at the subject about four seconds before shooting a still image.
Switching to Creative Shot Mode The camera determines the subject and shooting conditions, automatically applying special effects and recomposing the shot to emphasize the subject. Six still images are recorded for each shot. You can capture multiple still images with effects using camera-determined settings.
1. Press the power button to turn the camera on.
2. Set the Mode Switch to [ ].
3. You can choose effects for images captured in [ ] mode.
After choosing [ ] mode, press the [ ] button.
4. Press the [ ], [ ] buttons to choose the effect, and then press the [ ] button.
Selectable options are shown below.
Switching to Specific Scenes Mode 1. Press the power button to turn the camera on.
2. Set the mode switch to [ ].
3. Press the < FUNC./SET > [ ] button, choose [ ] in the menu, and then choose a shooting mode.
* [ ] is displayed as the default mode after purchase. If the settings have been changed, the selected shooting mode will be displayed.
The available shooting modes are listed below.
This completes the steps for switching shooting modes.
|
SIMS Doc Id
8201998900