Can a lens hood be used with the camera? (PowerShot SX60 HS)
Article ID: ART117287 |
| |
Date published: 05/12/2015 |
| |
Date last updated: 03/18/2016 |
Description
Can a lens hood be used with the camera? (PowerShot SX60 HS)
Solution
Can a lens hood be used with the camera? (PowerShot SX60 HS)
ID : 8202164800 _ EN _ 2
|
Solution |
Lens Hood [LH-DC90] (sold separately) can be used with the camera.
|
Lens Hood [LH-DC90]
Prevents extraneous light outside the angle of view from entering the lens and causing flares or ghosting, which reduce image quality. |
Using the Lens Hood (Sold Separately)
For wide-angle shots of backlit subjects without using the flash, attach optional Lens Hood [LH-DC90] to prevent light outside the angle of view from entering the lens.
IMPORTANT
- Camera accessories are sold separately. Note that availability varies by area, and some accessories may no longer be available.
- Vignetting may occur if you use the built-in flash when the lens hood is attached.
NOTE
- The filter adapter and a lens hood cannot be attached to the camera at the same time.
1. Make sure the camera is off
2. Align the lens hood mark (  ) with the camera mark (  ), and turn the lens hood in the direction of the arrow until it locks in place.
- To remove the lens hood, turn it in the opposite direction.

3. To attach the lens hood inverted (as shown) when the hood is not used, align the lens hood mark (  ) with the camera mark (  ), and turn the lens hood in the direction of the arrow until it locks in place.
|