Loading and Printing on Sheets (iPF680/iPF685/iPF780/iPF785/iPF670/iPF770)
Article ID: ART117331 | | | Date published: 05/12/2015 | | | Date last updated: 08/15/2015 |
Description
Loading and Printing on Sheets (iPF680/iPF685/iPF780/iPF785/iPF670/iPF770)
Solution
Loading and Printing on Sheets (iPF680/iPF685/iPF780/iPF785/iPF670/iPF770) ID
:
8202134900
_
EN
_
2
|
|
Solution |
Loading Sheets in the Printer Follow these steps to load sheets in the printer.
1.Select sheets as the paper source.
Sheets are automatically selected, and the media type and size specified by the print job are shown on the Display Screen. Go to the next step.
(1)Press the Load button.
![]() (2)Press
![]() ![]()
2.Slide the Width Guide (a) to align it with the mark for the size of paper you will load.
![]()
3.Load a single sheet printing-side up in the Paper Feed Slot, with the right edge aligned with the Paper Alignment Guide (a) to the right of the Roll Cover.
Insert the paper until the leading edge makes contact and you hear a tone.
![]()
4.Move the Width Guide (a) carefully to match the size of paper loaded.
Set the Width Guide against the edge of the paper to prevent the paper from becoming crooked or wrinkled.
![]()
5.Press the OK button.
The printer now starts printing the print job.
A menu for selection of the type of paper is automatically shown on the Display Screen.
Press
![]() ![]() The printer now starts feeding the paper.
Removing Sheets Remove sheets from the printer as follows.
1.On the Tab Selection screen of the Control Panel, press
![]() ![]() ![]() ![]()
2.Press the OK button.
The Paper Menu is displayed.
3.Press
![]() ![]() 4.Press
![]() ![]() The paper is ejected from the front of the printer.
5.Holding the paper, push the Release Lever back and remove the sheet.
![]()
6.Pull the Release Lever forward.
![]() |
SIMS Doc Id
8202134900