This article is available in the following languages:
Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.
Note
You need to prepare: a sheet of A4 or Letter-sized plain paper
Make sure that the power is turned on.
Load a sheet of A4 or Letter-sized plain paper in the rear tray.
Set the paper thickness lever to the right.
Hold down the RESUME/CANCEL button until the POWER lamp flashes twice, then release it immediately.
The nozzle check pattern will be printed.
Do not perform any other operations until the printer completes the printing of the nozzle check pattern.
Examine the nozzle check pattern.