Ask a Question

Printing the Nozzle Check Pattern from the Operation Panel - iP110

Article ID: ART117417 | Date published: 05/12/2015 | Date last updated: 05/10/2019
 

Description

This article explains how to print a nozzle check pattern for the PIXMA iP110 from the operation panel.

 

Solution

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.


Note

  • If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the ink tank whose ink is low.
 

You need to prepare: a sheet of A4 or Letter-sized plain paper

  1. Make sure that the power is turned on.
     

  2. Load a sheet of A4 or Letter-sized plain paper in the rear tray.
     

  3. Set the paper thickness lever to the right.
     

  4. Hold down the RESUME/CANCEL button until the POWER lamp flashes twice, then release it immediately.

    The nozzle check pattern will be printed.

    Do not perform any other operations until the printer completes the printing of the nozzle check pattern.
     

  5. Examine the nozzle check pattern.


 

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments