Changing metering modes PowerShot SD870 IS and SD950 IS.

Article ID: ART117681 | Date published: 05/12/2015 | Date last updated: 08/17/2015


Changing metering modes PowerShot SD870 IS and SD950 IS.


Switching between Light Metering Modes

You can switch between metering modes to shoot.

Evaluative Light Metering Appropriate for standard shooting conditions, including backlit scenes. The camera divides images into several zones for light metering. It evaluates complex lighting conditions, such as the position of the subject, the brightness, the direct light, and the backlighting, and adjusts the settings to the correct exposure for the main subject.

Center-Weighted Averaging Averages the light metered from the entire frame, but gives greater weight to the subject matter at the center.

Spot AE Point Meters the area within the spot AE point at the center of the LCD monitor. Use this mode when the subject is backlit or surrounded by strong light.
  1. Press the <FUNC./SET>button and select the (Manual) or (Digital Macro) shooting mode.
  2. Press the <FUNC./SET> button.

  3. Use the or buttons to select and press the <FUNC./SET> button.
  4. Use the or buttons to select the metering mode and press the <FUNC./SET> button.
    - After selecting an option, you can press the shutter button to shoot immediately. After shooting, this menu will appear again, allowing you to adjust the settings easily.

  5. Press the <FUNC./SET> button to exit.
This function is only available in the and modes.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments