177A Speedlite : How to attach the flash to a bracket or to the camera.

Article ID: ART117764 | Date published: 05/12/2015 | Date last updated: 08/17/2015


how to attach the flash to a bracket or to the camera.


  1. On the 177A there is a locking foot to prevent the unit from slipping out of the camera's accessory shoe. When you slip in the flash unit, the locking lever should be at the position opposite the direction of the arrow. Turn the power switch off and insert the foot of the flash unit as far as it goes and then secure the unit by moving the lock lever in the direction of the arrow.
  2. When using a camera without a directly-coupled contact on the accessory shoe use Synchro Cord A between the front of the flash unit and the PC socket of the camera
  3. When removing the flash unit from the camera , move the lever in the direction opposite the arrow



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments