Ask a Question

EOS 3 : How to delete Eye-Control Calibration Data

Article ID: ART117925 | Date published: 05/12/2015 | Date last updated: 08/17/2015
 

Description

How to delete Eye-Control Calibration Data

Solution

Deleting Eye-Control Calibration Data

If you need to replace the calibration data in a calibration channel (for a different user, eyeglass/contact lens wear, etc.) you must first delete the existing calibration data by following the procedure below. You can then register new calibration data by following the calibration procedure

Set the switch to <CAL>

Turn the dial until the CAL No. whose calibration data is to be deleted appears (not blinking)

Press the <*> button and the button simultaneously

  • The CAL No. will start blinking. This indicates that the calibration data has bee deleted

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments