Ask a Question

Procedure for resetting the camera to default PowerShot SD20.

Article ID: ART118346 | Date published: 05/12/2015 | Date last updated: 08/17/2015
 

Description

Procedure for resetting the camera to default PowerShot SD20.

Solution

Resetting the Settings to Default

You can reset all of the menu and button operation settings to default except for [Date/Time], [Language], and [Video System].

1. Turn on the camera.

2. Press the <MENU> button and hold it down for more than 5 seconds.

The message [Reset settings to default?] appears on the LCD monitor.

3. Select [OK] using the and buttons, then press the <SET> button.

  • To cancel resetting, select [Cancel] instead of [OK].

  • The custom white balance is not cancelled even if settings are reset to default settings.
  • Settings cannot be reset when the camera is connected to a computer, to an optional direct print function compatible printer (CP series) or to a direct print function compatible BJ printer (optional).

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments