Load paper correctly then press Black or Color button (MP210)
Article ID: ART118364 |
| |
Date published: 05/12/2015 |
| |
Date last updated: 08/17/2015 |
Description
After correcting the problem that caused the error, press the or button.
Solution
Load Paper Correctly
After correcting the problem that caused the error, press the <Black> or <Color> button.
- Remove paper from the rear tray.
- Open the paper output tray and extension. (See <2> and <3> in Figure 1 below.)
- Set the paper thickness lever according to the media being used. (See <4> in Figure 1 below.)
Note: For paper thickness lever settings, use the following setings for the media type being used: Right side: Envelopes / T-Shirt transfers. Left side: All other media types.
* Figure 1
- Divide the stack of paper into two or three piles.
- Fan out the sheets of paper so that they do not stick together.
- Load paper in the rear tray with the paper's print side facing up. (See <1> in Figure 2 below.)
- Align paper to the right edge of the rear tray. (See <2> in Figure 2 below.)
- Pinch and slide the paper guide to the paper's left side. (See <3> in Figure 2 below.)
* Figure 2
- Press <Black> or <Color> button to clear the error.