List of error messages on a DC40 DVD camcorder

 

Description

List of error messages on a DC40 DVD camcorder

Solution

List of Messages

SET THE TIME ZONE, DATE AND TIME You have not set the time zone, date and time. This message appears each time you turn the power on until you set the time zone, date and time.
CHANGE THE BATTERY PACK Battery pack is exhausted. Replace or charge the battery pack.
TEMPERATURE TOO HIGH CANNOT RECORD

TEMPERATURE TOO HIGH CANNOT REMOVE DISC

The camcorder has exceeded its operational temperature. Disconnect the compact power adapter and remove the battery and let the camcorder cool down before resuming use.
CANNOT RECORD CHECK THE DISC There is a problem with the disc. Replace the disc.
This message can also appear if condensation has formed. Wait until the camcorder dries completely before resuming use.
The disc's recording surface may be dirty or scratched.
REACHED THE MAXIMUM NUMBER OF SCENES The maximum number of scenes has been reached. Delete some recordings (DVD-RW in VR mode) to free some space or replace the disc.

CANNOT PLAY DISC

The disc is dirty or you attempted to play back a disc type not supported (not DVD-R/RW).
This message can also appear if condensation has formed. Wait until the camcorder dries completely before resuming use.

CANNOT DIVIDE THE SCENE

Photomovie scenes cannot be divided.
Scenes cannot be divided when the disc contains 999 scenes.
You may not be able to divide very short scenes.
You may not be able to further divide scenes shorter than 5 seconds that were created by dividing a previous scene.
CANNOT EDIT DISC There are no scenes to edit or the recording is damaged.
This message can also appear if condensation has formed. Wait until the camcorder dries completely before resuming use.
DISC IS FINALIZED CANNOT RECORD You cannot record additional scenes on a finalized DVD-R disc.
You cannot record additional scenes or unfinalize a DVD-RW disc in VIDEO mode that was finalized with another digital device.
UNFINALIZE THE DISC You cannot record additional scenes or convert still images to a Photomovie scene on a finalized DVD-RW recorded in VIDEO mode. Unfinalize the disc first.
DISC IS PROTECTED The disc is protected. Replace the disc or remove the disc protection.
DISC ERROR Initialize new DVD-RW discs before using them.

CANNOT READ THE DISC CHECK THE DISC

Disc could not be read. Try cleaning it or replace the disc.
This message can also appear if the camcorder has exceeded its operational temperature. Disconnect the power adapter and remove the battery and let the camcorder cool down before resuming use.
This message can also appear if condensation has formed. Wait until the camcorder dries completely before resuming use.
The disc may not be loaded correctly. Try removing the disc and reinserting it.

DISC ACCESS FAILURE CHECK THE DISC

There was a disc error when reading the disc or attempting to write onto it. Try cleaning the disc or replace it.
This message can also appear if condensation has formed. Wait until the camcorder dries completely before resuming use.
The disc may not be loaded correctly. Try removing the disc and reinserting it.
DISC COVER IS OPEN Verify the disc is correctly inserted and close the disc cover.

NO DISC

No disc is loaded. Insert a disc.
This message can also appear if condensation has formed. Wait until the camcorder dries completely before resuming use.
You inserted a disc recorded in a different Television System (PAL or SECAM).

UNABLE TO RECOVER DATA

Could not recover a corrupted file. Initialize (erase) the disc.
This message can also appear if condensation has formed. If you suspect condensation is the reason, do not initialize the disc and wait until the camcorder dries completely before resuming use.

AVOID MOVING THE CAMCORDER

Try not to move the camcorder while the image is being recorded.

LOADING THE DISC The disc is being read. Wait before you start recording.
DISC FULL The disc is full (" END" flashes on the screen). Delete some recordings (DVD-RW in VR mode) to free some space or replace the disc.
TASK IN PROGRESS DO NOT DISCONNECT THE POWER SOURCE The camcorder is updating important file allocation data on the disc. Do not disconnect the compact power adapter or remove the battery pack.
NO IMAGES No images are recorded on the disc.
THE CAMCORDER IS SET TO STILL IMAGE MODE

You pressed the Start/Stop button while recording still images ( mode).

CARD FULL Memory card is full. Erase some images to free some space or replace the memory card.
NAMING ERROR The folder and file numbers have reached their maximum value. Set the [FILE NOS.] option to [RESET] and initialize the disc, erase all the images on the disc (DVD-RW in VR mode) or replace the disc.

SIMS Doc Id

0

Doc ID   ART118605
Updated   08/17/2015

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments