How to set the paper to front (iPF6100)

1. Turn the printer on.
2. Press the Feeder Selection button to activate the Cut Sheet lamp.
3. "Press the Load/Eject button. After a menu for selection of the type of paper is shown on the Display Screen , press or to select POP Board , and then press the OK button. Next, a menu for selection of the paper size is shown on the Display Screen . Press or to select the size of paper, and then press the OK button."
4. Check Back Space is displayed, check the space behind the printer, lift the four Front Tray Guides on the Ejection Guide , and then press the OK button.
   
5. Open Upper Cover is displayed. At this point, open the Top Cover .
   
6. With the sheet printing-side up, place the leading edge on the Front Tray Guides and insert it straight into the Front Paper Feed Slot .
   
7. As you look inside the Top Cover , insert the leading edge of the paper between the Platen and Paper Retainer (a), keeping it parallel to the Paper Retainer (a), and align the paper with the Paper Alignment Line (b) of the Front Tray Guides .
   
8. Close top cover. is displayed. At this point, close the Top Cover and press the OK button.