Aligning the print head without a computer - iP4500

Article ID: ART119649 | Date published: 05/12/2015 | Date last updated: 08/17/2015


Aligning the print head without a computer - iP4500


Aligning the Print Head

Note: Automatic Print Head Alignment cannot be performed from the cassette. Always load paper in the Rear Tray.

1. Ensure that the Inner Cover is closed.

2. With the printer on, load two sheets of Letter-sized Canon Matte Photo Paper MP-101 with the printing side (whiter side) facing UP in the Rear Tray.

Note: Automatic print head alignment cannot be performed from the cassette (front feeder).

3. Hold down the < Resume/Cancel > button until the POWER lamp flashes green four times, and then release it immediately. The automatic alignment will then commence.

The print head alignment pattern is printed. Do not open the Top Cover while printing. The print head position is adjusted automatically when the print head alignment pattern finishes printing.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments